| Material |
Thermodeformed
Temperature |
Flameability |
Character |
Applicable Usage |
| Advantage |
Disadvantage |
| ABS |
96 ~ 112ĒJ
(4.6kg/cĒT) |
Flameable |
1. Good appearance,reasonable
cost
2. Excellent in plating property
3. Excellent in impact resistance al low temperature
4. Low shrinkage ratio at molding, excellent in dimensional
5. Excellent in acid-and baseresistance |
1. Inferior in weather resistance
2. Soluble in solrents |
1. Industrial parts(parts
for cameras, musical instruments)
2. Parts for electric machines
3. Parts for automobiles
4. Household hardware |
| PS |
82 ~ 104ĒJ
(4.6kg/cĒT) |
Flameable |
1. Excellent in moldability
2. Excellent in rigid, high hardness on surface
3. Excellent in transparency
4. Excellent in electric property
5. Excellent in acid-and base resistance
|
1. Inferior in impact resistance
2. Inferior in thermo-and weather resistance
3. Soluble in solvent |
1. Household hardware
2. Parts for electric appliances
3. Toys
4. Bulletin boards
5. Stationery |
| PVC |
62 ~ 72ĒJ
(4.6kg/cĒT) |
Self- Extinguishable |
1. Softness being regalated freely
2. Rigid and toughness
3. Excellent in weather resistance
4. Excellent in water-& chemical resistance
5. Cheap in cost |
1. Inferior in heat resistance and cold resistance
2. Inferior in impact resistance
3. Inferior in flexibility |
1. Pipes and fittings
2. Wrap for wire
3. Shoes (s)
4. Industrial parts, special chemistry parts(H)
5. FILM, SHEET, LEATHER
6. Rubber Substitutes |
| PA |
127 ~ 171ĒJ
(4.6kg/cĒT)
149~182ĒJ
(4.6kg/cĒT) |
Self- Extinguishable |
1. Toughness&impact- resistant
2. Self-wetting feature, low frictional resistance
3. Excellent in heat and cold resistance
4. Excellent in chemical and solvent resistance |
1. Large water absorbility, Inferior in dimensional
stability
2. Inferior in strong acid resistance |
1. Machinery parts (foldable parts, gears, axes,
etc)
2. Automobiles , electric appliances
3. Fasteners
4. Hoses, nuts, tubes |
| PBT |
155 ~ 160ĒJ
(4.6kg/cĒT) |
Inflameable |
1. Toughness&impact- resistant
2. Excellent in heat-resistance
3. Excellent in weather resistance
4. Self-wetting property & excellent in wear-resistance
5. Low water- absorbility and excellent in dimensional stability |
1. Inferior in heated water resistance
2. Inferior in base resistance |
1. Parts for electric machines (connectors)
2. Parts for machines (pipes, housing, gear)
3. Materials for constructuring
4. Household hardware |
| TPE |
Soften Point
100 ~ 160ĒJ |
Flameable |
1. Softness in feel & elasticity
2. Excellent in weather resistance , be resistant to against
a temperature below-40ĒJ |
1. Hardly pigmented |
1. Buffering, moffling and shockabsorbing materials
2. Shose, sporting accessaries
3. Home appliances, electric appliances, pads isolators |